Pipes & Tubing's - Choose Your Flavor

If you are intending on creating a home or perhaps remodeling your overall home one of the tougher decisions you might have is deciding on the best pipe for your personal project. Its not all piping is created equal, there are many different flavors on the market today which are old, new and true so which meets your needs? When you have your personal well the initial thing for you to do is get yourself a water sample and send it directly into your state water testing facility. They will try out your water for hardness, kinds of metals which are inside your water along with the ph or acidity levels. In case your acidity levels are high I would definitely recommend keeping away from any metal piping like copper or galvanized. Use any of these plastic pipes and tubing below. A little more about active water in just a minute. CPVC: This is the first plastic to reduce in to the copper market, in fact, my home was originally plumb with cpvc piping. The problem I needed using this piping is after 15 years of use so when I finally had to create a repair for the system, it crack three foot down the pipe when I made my cut with ratcheting scissors.

Let's talk a little about my favorite piping, the existing but true metal pipe copper. Besides, if you have a home that is thirty years or older, more than likely this is the type of water supply you have in your home, Galvanized, this is the stuff all of us old timers cut our teeth on and. Copper commonly is available in roll tubing in boxes of 25 feet to 100 feet per box or rigid sticks of 10' to 20' feet long. You can find three grades of copper pipe: Type K, will be the thickest of your three pipes. It offers green lettering on pipe and is the most expensive. L piping has blue M and lettering has red lettering. M and L grade copper is considered the most commonly used in residential plumbing. The common use with type K is at industrial plumbing systems or refrigeration. Low bidders usually use type M copper pipe. Diameter References:

For the householder, repairing any of the above pipes and tubing mention in the following paragraphs is really a snap. Purchase "shark bites" fitting and also the u shaped tool to mend or increase any part of your system. Shark bite fittings are available at the local plumbing shop. You will make the cost back in time and ease of use, even though they are a little costly.

In addition to the EPA commission has listed copper as contaminate. It is actually my understanding that the utmost amount of copper, in accordance with EPA standards, is 1.3 parts per million (1.3 mg/L). Copper tubing must not be installed for water piping systems having acidic water conditions having a pH of 8.5 or less. Private mountain and wells communities can have a pH of less than 6.5 This is why I recommend that you test the pH of your water if you plan to use copper or any type of metal piping for your potable water system.

If you are on a community water system, check with your local authorities for recommendations. In addition, i recommend, to not install metal piping without conditioning the liquid with an acid neutralizer first. Rigid copper needs to be solder. If you are not familiar with the soldering procedure involved in making a leak free joint then I recommend that you call your local plumber to install or repair your plumbing system. For more information please visit Chrome Plated Tubes

Write a comment

Comments: 0